Not only can soap scum cause your glass shower doors to appear cloudy, distracting from their beauty and elegance, but it can actually cause permanent etching on the glass. Consequently, it is very important to prevent the buildup of soap scum in your shower if you want to prevent this damage and keep your glass looking great for many years to come. Thankfully, the three tips outlined below can help to make this task much easier.
Tip #1: Switch To Liquid Soap
Perhaps the most effective way to prevent soap scum from building up on your shower doors is to simply switch the type of soap that you use. This is because soap scum is caused by the talc that is found in most bar soaps. Since liquid soaps or body washes do not make use of talc, making the switch to these products can eliminate the potential for soap scum entirely.
If you are absolutely opposed to the use of liquid soap in the shower, you may also wish to consider switching to all-natural or artisan soaps that are available in talc-free varieties.
Tip #2: Apply A Water-Resistant Coating To The Doors
In order for soap scum to form, the soapy water must first be allowed to dry on your glass shower doors. Applying a water-resistant coating to your doors can help to prevent this from happening by causing the water to bead up and roll off the glass rather than puddling and drying in place.
If you are struggling to find a water-resistant glass treatment in the bathroom section at your local hardware or home improvement store, you may wish to move your search to the automotive section since these products are most commonly sold to treat windshields.
When applying this coating to your door, it is important to prevent the product from coming into contact with your shower floor or tiles, as it can make these surfaces very slippery. Covering these surfaces with a tarp or drop cloth during the application process can make this task a bit easier.
Tip #3: Spray With Basic Cleanser After Each Shower
While you are not going to want to scrub your shower after each and every use, taking just a minute or two in order to perform some very basic maintenance can go a long way towards preventing the buildup of soap scum. In order to perform this maintenance, you will simply need to make a solution of two parts water to one part white vinegar. Place this mild cleaning solution in a clean spray bottle and just give your shower doors a quick spray after each time you use your shower. This will typically be enough to keep soap scum, mineral deposits, and mildew at bay in between more thorough cleanings.
Contact the company that made your shower doors to learn more about how to best maintain them.